Swiper Wiper Entrance Mat

MAINTENANCE TIPS

Proper maintenance ensures your Swiper Wiper Entrance Mats deliver years of reliable outdoor performance.

Daily Maintenance

Shake-Out Protocol: Remove Swiper Wiper Entrance Mats from their location and shake vigorously to dislodge loose dirt, debris, leaves, and surface moisture. Perform this task at least 25 feet from the entrance to prevent re-contamination. In high-traffic commercial applications, shake mats 2-3 times daily during peak seasons.
Quick Surface Cleaning: Use a stiff-bristled push broom to sweep debris from the mat surface between shake-outs. This prevents dirt accumulation in the parquet channels and maintains optimal scraping performance throughout the day.

Weekly Deep Cleaning

Hose-Off Cleaning: Take Swiper Wiper Entrance Mats to an outdoor cleaning area. Use a standard garden hose with spray nozzle to flush dirt from the parquet channels and water pan area. Start from one end and work systematically across the mat surface, ensuring water penetrates all recessed areas.
For stubborn dirt accumulation, use a pressure washer maintaining 12-18″ distance from the mat surface. Avoid excessive pressure that could damage the rubber blades.
Floor Cleaning: While mats are removed for cleaning, sweep and clean the area beneath to prevent dirt accumulation that could cause mat movement or shifting.

Monthly Maintenance

Extraction Cleaning: For heavily soiled Swiper Wiper Entrance Mats, use an extraction cleaning method with mild detergent and hot water. Apply cleaning solution, scrub with a stiff brush if needed, then rinse thoroughly. This deep cleaning restores the mat’s appearance and scraping effectiveness.

Drying Process: After wet cleaning, stand Swiper Wiper Entrance Mats on edge in a well-ventilated area or direct sunlight. The rubber construction dries quickly—typically 2-4 hours in good conditions. Never return wet mats to service as moisture attracts dirt and reduces scraping performance.

Seasonal Considerations
Winter Care: During de-icing salt season, increase cleaning frequency to prevent salt crystal buildup in the parquet channels. Rinse mats weekly with fresh water to remove salt residue that could cause white discoloration on darker surfaces.
Spring Deep Clean: After winter, conduct thorough cleaning to remove accumulated salt, sand, and winter debris. This prepares mats for the rainy spring season when water retention capacity is most critical.
Summer Maintenance: In hot weather, mats may temporarily expand slightly. This is normal rubber behavior and does not affect performance. Ensure adequate airflow beneath mats in extreme heat.
Fall Preparation: Before leaf season, increase shake-out frequency to prevent organic matter accumulation in the water channels. Leaves and organic debris can reduce drainage capacity if allowed to decompose in the mat structure.

Cleaning Products
Recommended:

1. Mild dish soap or neutral pH cleaner
2. Standard household cleaners safe for rubber
3. Warm water for enhanced dirt removal
4. Degreasing cleaners for oil/grease exposure

Avoid:

1. Petroleum-based solvents
2. Harsh alkaline or acidic cleaners
3. Bleach or chlorine-based products
4. Any chemicals not rated for rubber surfaces

Inspection Schedule
Conduct monthly inspections checking for:

1. Blade wear or damage in high-traffic areas
2. Beveled edge integrity
3. Unusual mat movement or shifting
4. Excessive dirt accumulation in channels
5. Overall structural integrity

Rotate Swiper Wiper Entrance Mats 180 degrees quarterly to equalize wear patterns and extend service life to 7+ years.

Professional Cleaning
For facilities without outdoor cleaning capabilities, many commercial mat services offer pickup, cleaning, and delivery. Schedule professional cleaning monthly or quarterly based on traffic levels and weather exposure.