Easy Step Rubber Mats

MAINTENANCE TIPS

Easy Step Rubber Mats require minimal maintenance while delivering maximum performance and longevity.

Daily Maintenance

Quick Shake-Out

Remove Easy Step Rubber Mats and shake vigorously outdoors at least twice daily in high-traffic locations.

The lightweight flexible design makes this simple for any employee. Perform shake-outs at least 25 feet from entrances to prevent debris reentry.

Spot Cleaning

Address spills immediately by wiping with absorbent cloths or paper towels.

For greasy or oily spills, use mild detergent and warm water. The nitrile rubber resists staining and wipes clean easily.

Weekly Cleaning

Hose-Off Method

Once weekly, remove Easy Step Rubber Mats and hose off thoroughly with water.

Use moderate pressure to dislodge embedded dirt from the molded grip surface. The brush-like pattern releases debris easily under water pressure.

Hang mats vertically or lay flat on clean surface to air dry—typically 1-2 hours in warm conditions.

Scrub Brush Cleaning

For heavier soil accumulation, scrub with stiff-bristle brush and mild detergent solution.

Work cleaning solution into the molded pattern to remove ground-in grime. Rinse thoroughly with clean water and allow to dry completely.

Monthly Deep Cleaning

Pressure Washing

Monthly pressure washing provides the deepest clean for Easy Step Rubber Mats in heavy-use applications.

Use medium pressure (1500-2000 PSI) to avoid damaging the nitrile rubber. The durable construction withstands repeated pressure washing without degradation.

Degreasing Treatment

In kitchens or automotive environments, apply commercial degreaser monthly.

Allow degreaser to dwell for 5-10 minutes, scrub with stiff brush, then rinse thoroughly. The chemical-resistant nitrile rubber handles industrial degreasers without damage.

Seasonal Considerations

Winter Salt Removal

During de-icing salt season, increase cleaning frequency to 2-3 times weekly.

Salt residue can create white deposits and reduce traction. Regular rinsing prevents salt accumulation and maintains slip resistance.

Summer Moisture Management

In humid summer conditions, ensure Easy Step Rubber Mats dry completely between cleanings.

The nitrile rubber resists mold and mildew, but proper drying prevents any moisture-related issues. Increase air circulation around drying mats when possible.

Spring Deep Clean

After winter, conduct comprehensive cleaning to remove accumulated salt, sand, and winter debris.

This prepares mats for spring rain season when moisture management becomes critical. Inspect for any wear from winter conditions.

Fall Preparation

Before wet fall weather, verify mat placement for optimal water management.

Position Easy Step Rubber Mats at all entrances where rain, leaves, and mud will be tracked inside. The slip-resistant surface handles autumn moisture effectively.

Cleaning Products

Recommended:

• Mild dish detergent or all-purpose cleaner
• Commercial degreasers (for kitchen/automotive use)
• Standard industrial floor cleaners
• Warm water for routine cleaning

Avoid:

• Harsh acids or alkalis above pH 10
• Solvents like acetone or MEK (though nitrile resists these better than standard rubber)
• Abrasive cleaning tools that could damage surface texture
• Bleach solutions at high concentrations

Storage and Rotation

Proper Storage

When not in use, roll Easy Step Rubber Mats and store in dry location.

Avoid folding, which can create permanent creases. Store away from direct sunlight and extreme temperatures.

Quarterly Rotation

Rotate mats 180 degrees every three months to equalize wear patterns.

This extends service life by distributing high-traffic wear across the entire mat surface. Expect 3-5 years of heavy commercial use with proper rotation.

Inspection Schedule

Conduct monthly inspections for:

• Surface texture integrity
• Beveled edge condition
• Overall flexibility and durability
• Any chemical damage or degradation
• Slip resistance effectiveness

Replace Easy Step Rubber Mats when surface pattern becomes significantly worn or if beveled edges deteriorate.